Parts Compatible with FUJI Placement Machines

This category collects spare parts compatible with FUJI SMT placement machines, covering the NXT modular platform and the older CP, XP and QP series. It includes wear parts that are replaced routinely (nozzles, filters, belts), feeder parts for keeping feeders running, and repair parts such as boards, motors and drivers, many listed by part number so you can match them to your parts manual.

What is in this category

  • Nozzles and nozzle stations: nozzles for NXT heads (H01/H02, H04/H04S, H08/H08M, H12, H24 and others, across common sizes from very small to large), CP/XP series nozzles and ceramic nozzle tips, plus nozzle station spare parts. See for example nozzles compatible with FUJI NXT H08M heads and nozzle stations compatible with FUJI NXT.
  • Feeders and feeder parts: feeder part number cross-references for NXT W-series and XP feeders, and feeder repair parts such as gears, motors, tape drive parts, flexible cables, springs, O-rings and calibration plates for preventive maintenance. A cross-brand feeder part number list is also available.
  • Feeder carts: feeder carts compatible with FUJI in 70 to 90 slot versions.
  • Belts and motion parts: conveyor belts, cam belts, ball screws, bearings and guide rail parts.
  • Pneumatics and vacuum: solenoid valves used for nozzle vacuum switching and head up/down, cylinders, vacuum generators and filter elements.
  • Electronics: control boards (main, I/O and vision boards) by part number, drivers, motors, fibre sensors, amplifiers, lighting modules and camera glass.
  • Maintenance items: filter pads for NXT III and other models, springs and small hardware.

How to choose

  • Start from the part number. Most FUJI parts are identified by a part number in the parts manual or on the old part’s label; the part number is the most reliable way to match.
  • Confirm the machine and head. Nozzles must match the head type (for example an NXT H08M head versus an H24 head) and the component size; feeders must match the platform and tape width.
  • Separate routine wear parts from repair parts. Keep nozzles, filters and belts on a preventive maintenance schedule; for boards, motors and drivers, confirm the exact part number and revision before ordering.
  • Feeder repair: if feeders stop for unclear reasons, flexible cables, keypad covers and tape guides are common items to check; the product pages list these by part number.

What to send us

To quote or source a part, send: the machine model (for example NXT III or CP7), head or feeder type, the part number, a photo of the part and its label, the quantity, and the problem you are seeing. Contact Jiahon.

Parts in this category are compatible (non-original) parts unless the product page says otherwise; FUJI is a trademark of its owner and is used only to identify machine compatibility.

Email us for a quote: [email protected]

Back to top