Parts Compatible with JUKI Placement Machines

This category collects spare parts compatible with JUKI SMT placement machines, mainly the KE series (such as KE2010, KE2050, KE2060, KE2070 and KE2080) and the FX series (FX-1, FX-1R, FX-3). It covers nozzles, feeder parts, servo motors and driver boards, with many items listed by part number so they can be matched against your parts manual.

What is in this category

  • Nozzles: JUKI-compatible nozzles across the common series used on KE and FX machines, including fine-tip nozzles for FX-1 and FX-3 and replacement nozzles for worn tips and fatigued springs. See for example nozzles compatible with JUKI KE2000 series.
  • Feeder parts: parts for ATF, CTF/CTFR, FTF/FTFR and older NF (KE750), RF and EF feeders in 8 to 56 mm widths: tape covers, reel covers, centre shafts, gears, springs, swing arms, links and locating blocks; plus feeder parts for electric, stick and high-precision feeders. See for example parts compatible with JUKI FTF feeders.
  • Feeder cart: an 80-slot feeder cart compatible with JUKI.
  • Motors: X, Y and T axis servo motors for KE and FX machines, and motor spares for repair. See for example servo motors compatible with JUKI KE series.
  • Drivers and boards: servo amplifiers, driver boards and relays used in the machine’s servo and control systems, listed by part number.
  • Machine spares: board in/out sensors, solenoid valve filters, stopper units, safety door gas springs, monitors and other miscellaneous parts, some shared with other machine brands.

How to choose

  • Start from the part number. JUKI parts are identified by part numbers in the parts manual or on the part’s label; matching by part number avoids most ordering mistakes.
  • Confirm the machine model. Motors and driver boards differ between KE and FX models and between axes; nozzles must suit the head and the component size.
  • Match the feeder type and width. Feeder parts are specific to the feeder family (ATF, CTF, FTF, NF, RF, EF) and tape width.
  • Plan preventive maintenance. Nozzles, springs and filters wear with use; keep a stock of common sizes so a worn nozzle does not stop the line.

What to send us

To quote or source a part, send: the machine model (for example KE2060 or FX-3), the head, feeder or axis concerned, the part number, a photo of the part and its label, the quantity, and the problem you are seeing. Contact Jiahon.

Parts in this category are compatible (non-original) parts unless the product page says otherwise; JUKI is a trademark of its owner and is used only to identify machine compatibility.

Email us for a quote: [email protected]

Back to top