These antistatic vacuum-formed square trays have cavity lengths of 91–200 mm, for larger parts that contain ESD-sensitive components: small PCBAs (with MCU or RF chips), industrial controller housings with sensors, servo motor stators (with encoder chips) and medical equipment boards. Cavity counts run from 4 to 45, cavity depths up to about 50 mm, and outer sizes up to 675 × 460 mm; surface resistance is 10⁶–10⁹ Ω, for plants with strict ESD control.
All 52 models on this page (smallest to largest)
Cavity count is the number of cavities per tray. If your size isn’t listed or you need a custom tray, request a quote below. All models are antistatic.
| Model | Cavity L × W × D (mm) | Outer size (mm) | Cavities | Thickness |
|---|---|---|---|---|
| JHDY0002 (black) | 91 × 32 × 23 | 316 × 283 × 28 | 18 | — |
| JH0210018 | 91 × 60 × 6 | 320 × 282 × 10 | 12 | — |
| JHXLDQ0001 | 92 × 90 × 25 | 420 × 330 × 31 | 12 | — |
| JH801040001 | 92 × 92 × 40 | 575 × 420 × 45 | 20 | — |
| JHTREF070 | 95 × 35 × 18 | 370 × 340 × 24 | 24 | — |
| JH190003 (black) | 95 × 43 × 18 | 330 × 233 × 25 | 12 | — |
| JHDD0089 (black) | 100 × 23 × 24 | 443 × 337 × 24 | 45 | — |
| JH11003-PS(0.5T) | 100 × 60 × 18 | 385 × 335 × 19 | 15 | 0.5T |
| JH11003-PS(1T) | 100 × 60 × 18 | 385 × 335 × 19 | 15 | 1T |
| JH0210010 | 100 × 62 × 25 | 380 × 370 × 30 | 12 | — |
| JHTREF071 | 100 × 63 × 15 | 395 × 345 × 17 | 15 | 0.7T |
| JHTREF072 | 100 × 63 × 15 | 395 × 345 × 17 | 15 | 1.1T |
| JHCG0001 (black) | 100 × 100 × 46 | 475 × 475 × 50 | 16 | — |
| JH800480045 (black) | 101 × 15 × 16 | 230 × 230 × 16 | 20 | — |
| JHPNDZ0003 | 105 × 68 × 31 | 410 × 290 × 31 | 10 | — |
| JH11005-PS(0.5T) | 105 × 95 × 16 | 420 × 385 × 16 | 12 | 0.5T |
| JH11005-PS(0.7T) | 105 × 95 × 16 | 420 × 385 × 16 | 12 | 0.7T |
| JH11005-PS(1T) | 105 × 95 × 16 | 420 × 385 × 16 | 12 | 1T |
| JH05094E12801 (black) | 107 × 50 × 20 | 478 × 350 × 20 | 24 | — |
| JHSTH0002 | 107 × 55 × 10 | 540 × 435 × 17 | 24 | — |
| JHSTH0006 (black) | 110 × 60 × 28 | 557 × 387 × 31 | 20 | — |
| JHTREF073 | 111 × 74 × 32 | 255 × 180 × 37 | 4 | — |
| JHTREF074 | 112 × 62 × 22 | 510 × 385 × 28 | 20 | 0.7T |
| JHTREF075 | 118 × 50 × 27 | 500 × 310 × 33 | 14 | 1.1T |
| JH11203-PS | 120 × 30 × 33 | 450 × 300 × 38 | 20 | 0.5T |
| JHTREF076 | 120 × 70 × 33 | 440 × 300 × 35 | 10 | 1.0T |
| JHTREF077 | 120 × 70 × 33 | 440 × 300 × 35 | 10 | 1.5T |
| JHTREF078 | 128 × 67 × 17 | 425 × 300 × 21 | 10 | — |
| JHBCD0001 | 133 × 105 × 15 | 505 × 470 × 25 | 12 | — |
| JHTREF079 | 133 × 108 × 24 | 510 × 470 × 34 | 12 | 0.8T |
| JHTREF080 | 133 × 108 × 24 | 510 × 470 × 34 | 12 | 1.0T |
| JH0210039 (black) | 134 × 134 × 30 | 320 × 320 × 35 | 4 | — |
| JHTREF081 | 135 × 82 × 10 | 470 × 305 × 15 | 10 | — |
| JHTREF082 | 140 × 27 × 10 | 335 × 310 × 12 | 20 | — |
| JH801040002 | 141 × 121 × 40 | 525 × 420 × 45 | 9 | — |
| JHTREF083 | 145 × 60 × 16 | 640 × 420 × 22 | 24 | — |
| JHTREF084 | 148 × 78 × 42 | 500 × 350 × 46 | 8 | — |
| JHQFWJ0001 | 150 × 140 × 30 | 505 × 325 × 35 × 1 | 6 | — |
| JHZJZB0001 | 151 × 66 × 44 | 426 × 280 × 47 | 6 | — |
| JHTREF085 | 152 × 133 × 40 | 675 × 460 × 42 | 12 | — |
| JHTREF086 | 155 × 78 × 29 | 555 × 330 × 33 | 9 | — |
| JHDD074 (black) | 160 × 116 × 42 | 393 × 258 × 42 | 4 | — |
| JHTREF087 | 163 × 44 × 50 | 337 × 240 × 50 | 5 | — |
| JH11601-PS | 165 × 80 × 15 | 470 × 380 × 15 | On request | 0.5T |
| JHTREF088 | 165 × 81 × 20 | 475 × 365 × 23 | 10 | 1.2T |
| JHTREF089 | 165 × 81 × 20 | 475 × 365 × 23 | 10 | 0.9T |
| JHTREF090 | 165 × 85 × 35 | 540 × 400 × 40 | 10 | — |
| JHJYXGY0001 | 165 × 158 × 1 | 517 × 420 × 17 | 4 | — |
| JHTREF091 | 170 × 32 × 30 | 490 × 420 × 50 | 20 | — |
| JHTREF092 | 175 × 65 × 40 | 565 × 440 × 45 | 12 | — |
| JH11701-PS | 175 × 90 | 540 × 380 × 17 | On request | 0.7T |
| JHTREF093 | 180 × 37 × 42 | 378 × 280 × 18 | 20 | — |
Smaller cavities: ≤90 mm series. Larger cavities: >200 mm series.
Representative models and typical components
| Model | Cavity (L × W × D mm) | Outer size (mm) | Cavities | Typical components |
|---|---|---|---|---|
| JHDY0002 (black) | 91 × 32 × 23 | 316 × 283 × 28 | 18 | Slim industrial controller housings |
| JH0210018 | 91 × 60 × 6 | 320 × 282 × 10 | 12 | Thin small PCBAs, optical sensor substrates |
| JHXLDQ0001 | 92 × 90 × 25 | 420 × 330 × 31 | 12 | Square module housings, large industrial sensors |
| JH801040001 | 92 × 92 × 40 | 575 × 420 × 45 | 20 | Deep square parts, modules with protruding connectors |
| JHDD0089 (black) | 100 × 23 × 24 | 443 × 337 × 24 | 45 | Long slim parts, long PCBs with chips |
| JH0210010 | 100 × 62 × 25 | 380 × 370 × 30 | 12 | Small PCBAs, industrial gateway modules |
Choosing wide-pitch ESD trays: key checks for carrying PCBAs
| PCBA / component type | Choosing cavity depth | Cavity count | Watch out for |
|---|---|---|---|
| Small SMT-only PCBAs (no through-hole parts) | Tallest component + 2 mm clearance | 12–45 | Make sure tall upright capacitors or connectors don’t exceed the cavity depth |
| PCBAs with through-hole connectors | Connector height + 5 mm margin | 6–20 | Place with protruding connectors facing up and check they don’t press on neighboring cavities |
| Industrial controller housings (with chips) | By maximum housing height | 12–20 | If screw bosses protrude under the housing, the cavity floor needs flat support |
| Medical equipment boards | By the tallest component | 6–12 | Lining the cavity floor with conductive EVA foam is recommended for double protection |
The core value of wide-pitch antistatic trays is extending a plant’s ESD control to carrying and moving large parts. Many plants use antistatic trays strictly for small ICs, then switch to ordinary trays or packaging for PCBAs, which breaks the ESD control chain. This series fills that gap so wide-pitch applications also meet ESD audit requirements.
Note on very large trays: some models have outer sizes up to 575 × 420 mm or more; use a transport cart when moving stacks, rather than carrying them by hand, to keep trays from tilting and parts from sliding out of their cavities.
Antistatic series size guide: ≤20 mm, ≤30 mm, ≤45 mm, ≤60 mm, ≤90 mm, ≤200 mm, >200 mm.
Further reading: antistatic trays with no tooling and a 50-piece minimum; shared tray tooling with nearly a hundred molds to lower tooling costs.
How to request a quote: please send (1) the model, or your component dimensions; (2) the quantity.
Request a quote
Send the model or component dimensions, and quantity. Request a quote →