Black conductive / static-dissipative PS | ESD-protected transit for mid-size ICs, modules and connectors | samples from stock
All 48 models on this page (smallest to largest)
Cavity count is the number of cavities per tray. If your size isn’t listed or you need a custom tray, request a quote below. All models are antistatic.
| Model | Cavity L × W × D (mm) | Outer size (mm) | Cavities | Thickness |
|---|---|---|---|---|
| JH800480012 | 30.5 × 20.5 × 4.5 | 275 × 196 × 6 | 50 | — |
| JHHNYMS0001 (black) | 31 × 16 × 5 | 406 × 346 × 6 | 150 | — |
| JHPLCJM0001 | 31 × 16 × 11 | 270 × 200 × 15 | 50 | — |
| JHTREF021 | 32 × 32 × 5 | 250 × 245 × 10 | 25 | — |
| JHZHKJ0001 | 32.5 × 20.25 × 3.5 | 310 × 215 × 8.5 | 50 | — |
| JHLHXXKJ0001 | 33 × 31 × 6 | 260 × 230 × 11 | 30 | — |
| JH800160001 | 34 × 13 × 10 | 279 × 255 × 18 | 50 | — |
| JHZTKJ0001 | 34 × 21 × 7 | 300 × 215 × 11 | 50 | — |
| JH10306-PS(0.5T) | 35 × 17 × 20 | On request | On request | 0.5T |
| JH10306-PS(0.55T) | 35 × 17 × 20 | 305 × 250 × 27 | 50 | 0.55T |
| JHTREF022 | 35 × 18 × 20 | 305 × 245 × 22 | 50 | 0.7T |
| JHNJJC0002 | 36 × 20.5 × 6 | 365 × 215 × 10 | 56 | — |
| JHTREF023 | 36 × 31 × 12 | 380 × 250 × 17 | 50 | — |
| JH090010 | 36 × 32 × 6 | 320 × 265 × 8 | 42 | — |
| JH10304-PS | 36 × 36 × 19 | On request | On request | 0.5T |
| JH090004 | 36.5 × 26.5 × 3 | 320 × 265 × 5 | 56 | — |
| JH090016 | 37 × 14 × 4 | 320 × 265 × 8 | 70 | — |
| JH190008 | 37 × 23 × 4.5 | 240 × 164 × 10 | 25 | — |
| JHFPV0001 | 37.5 × 27.5 × 7 | 290 × 200 × 7 | 30 | — |
| JHTREF024 | 38 × 32 × 12 | 290 × 240 × 14 | 25 | — |
| JHTREF025 | 38 × 38 × 7 | 300 × 290 × 15 | 30 | — |
| JHTREF026 | 38 × 38 × 20 | 270 × 270 × 22 | 25 | — |
| JHTP003 | 39 × 31 × 9 | 440 × 295 × 13 | 60 | — |
| JHTP019 | 40 × 20 × 25 | 267 × 167 × 30 | 25 | — |
| JHZTKJ0002 | 40 × 23 × 7 | 335 × 250 × 13 | 50 | — |
| JHTREF028 | 40 × 25 × 30 | 285 × 175 × 32 | 25 | — |
| JHGYDZ0001 | 40 × 28 × 10 | 285 × 185 × 15 | 30 | — |
| JHTREF027 | 40 × 40 × 5 | 215 × 210 × 10 | 25 | — |
| JH0210017 | 41 × 19 × 5 | 315 × 132 × 10 | 24 | — |
| JHTREF029 | 41 × 23 × 8 | 336 × 243 × 14 | 40 | — |
| JHTREF030 | 41 × 33 × 13 | 380 × 280 × 18 | 40 | — |
| JHPCDZ0001(0.8T) | 41 × 41 × 10 | 260 × 260 × 15 | 25 | 0.8T |
| JHPCDZ0001(0.6T) | 41 × 41 × 10 | 260 × 260 × 15 | 25 | 0.6T |
| JHPCDZ0001 (white) | 41 × 41 × 10 | 260 × 260 × 15 | 25 | — |
| JHADKM0001 (black) | 41 × 41 × 30 | 273 × 273 × 35 | 25 | — |
| JHJTKJ0001 | 42 × 27 × 7 | 320 × 180 × 13 | 30 | — |
| JHTREF031 | 42 × 29 × 8 | 310 × 230 × 15 | 25 | — |
| JHTREF032 | 42 × 39 × 26 | 510 × 315 × 30 | 50 | — |
| JHXQDZ0003 | 42 × 40 × 18 | 394 × 325 × 23 | 42 | — |
| JHTREF033 | 43 × 31 × 25 | 340 × 295 × 27 | 42 | — |
| JH11000 | 44 × 10 × 13 | 256 × 154 × 13 | 50 | — |
| JHFSKT0002 | 44 × 14 × 5 | 355 × 254 × 15 | 60 | — |
| JHTWQSQ0001 | 44 × 24 × 24 | 345 × 280 × 25 | 50 | — |
| JHTREF036 | 45 × 20 × 15 | 420 × 315 × 20 | 70 | — |
| JHTREF034 | 45 × 32 × 14 | 345 × 295 × 16 | 42 | 0.6T |
| JHTREF035 | 45 × 32 × 14 | 345 × 295 × 16 | 42 | 1.1T |
| JHXZKC0004 | 45 × 45 × 8 | 335 × 270 × 12 | 20 | — |
| JHGFJD0001 | 45 × 45 × 15 | 540 × 440 × 20 | 48 | — |
Smaller cavities: ≤30 mm series. Larger cavities: ≤60 mm series.
Where is this size range used on SMT lines?
Antistatic trays with 31–45 mm cavities are among the most frequently used sizes on SMT lines in electronics plants. The range covers most mid-size IC packages (QFP, SOP and larger BGA), module-type components, contact connectors and some small power modules.
Compared with the ≤30 mm series, parts in this range usually cost more per unit and need more attention to static sensitivity. Choosing the right tray material and cavity clearance directly affects yield and reliability.
≤30 mm or ≤45 mm series?
| Item | Antistatic tray ≤30 mm series | Antistatic tray ≤45 mm series (this page) |
|---|---|---|
| Maximum cavity length | 30 mm | 45 mm |
| Typical components | Small ICs, SMD chips, sensors | Mid-size ICs, QFP / SOP packages, modules, connectors |
| Cavities per tray | Usually more (20–150) | Usually fewer (20–70) |
| Material | Antistatic / conductive black PS, same ESD protection level | Antistatic / conductive black PS, same ESD protection level |
| Wall thickness | 0.6T / 0.7T for some models | 0.6T / 0.7T / 0.8T / 1.1T for some models |
Series key specifications
- Cavity length range: 30.5–45 mm (square cavities)
- Material / color: antistatic / conductive PS, black (white for some models)
- ESD protection: static dissipative, with reference to ANSI/ESD S20.20 classification requirements
- Outer sizes: many sizes; see each model in the table
Two common mistakes
Mistake 1: “If it just fits, that’s enough.” A cavity exactly the size of the part looks precise, but leaves almost no cushion during handling or vibration. Leave 0.5–1 mm clearance on each side so parts go in without forcing and don’t get pinched if the tray flexes.
Mistake 2: “An antistatic tray works anywhere.” An antistatic tray is just one part of an EPA (ESD protected area). If operators don’t wear wrist straps, the floor isn’t static-dissipative, or the tray has no grounding path to dissipate charge, its protection is greatly reduced. Trays are one component of system-level protection, not a stand-alone solution.
Choosing wall thickness (0.6T / 0.8T / 1.1T)
Some cavity sizes come in several wall thicknesses. Thinner walls (0.6T) are lighter and stack in less space, suited to manual kitting stations. Thicker walls (0.8T–1.1T) are more rigid, for robotic picking or trays reused for many turnover cycles. If unsure, choose the thicker version.
Further reading: antistatic trays with no tooling and a 50-piece minimum; shared tray tooling with nearly a hundred molds to lower tooling costs.
How to request a quote: please send (1) the model, or your component dimensions; (2) the quantity.
Request a quote
Send the model or component dimensions, and quantity. Request a quote →