These antistatic vacuum-formed square trays have cavity lengths of 46–60 mm, for mid-size ESD-sensitive components: multi-pin QFP / QFN ICs, automotive connectors, sensor modules with MCUs and HDD / SSD controller board connectors. Surface resistance is 10⁶–10⁹ Ω; most models are black antistatic material, and you can match them directly to your component size to request samples.
All 41 models on this page (smallest to largest)
Cavity count is the number of cavities per tray. If your size isn’t listed or you need a custom tray, request a quote below. All models are antistatic.
| Model | Cavity L × W × D (mm) | Outer size (mm) | Cavities | Thickness |
|---|---|---|---|---|
| JHLongYuan0001 (black) | 46 × 19 × 12 | 275 × 143 × 12 | 25 | — |
| JHFSKT0001 | 46 × 23 × 17 | 355 × 255 × 17 | 40 | — |
| JHTREF037 | 46 × 40 × 10 | 265 × 255 × 12 | 20 | — |
| JHTREF038 | 46 × 41 × 11 | 460 × 320 × 18 | 48 | — |
| JH10402-PS | 46 × 46 × 14 | 395 × 295 × 22 | 35 | 0.5T |
| JHTREF039 | 47 × 15 × 8 | 270 × 205 × 10 | 50 | — |
| JH10403-PS | 47 × 41 × 11 | On request | On request | 0.5T |
| JHXAMD0003 | 48 × 25 × 16 | 385 × 285 × 20 | 60 | — |
| JH0210041 (black, 0.8T) | 48 × 48 × 30 | 320 × 320 × 36 | 25 | — |
| JH0210041 (black, 1.6T) | 48 × 48 × 30 | 320 × 320 × 36 | 25 | — |
| JH10409-PS | 49 × 16 × 7 | 460 × 300 × 12 | 100 | 0.5T |
| JHTREF040 | 50 × 17 × 7 | 460 × 300 × 11 | 100 | — |
| JH10502-PS | 50 × 20 × 26 | 310 × 285 × 26 | 50 | 0.5T |
| JHYS0001 (black) | 50 × 25 × 15 | 340 × 240 × 21 | 30 | — |
| JHHS0001 | 50 × 30 × 7 | 410 × 308 × 12 | 50 | — |
| JHTREF041 | 50 × 35 × 12 | 465 × 345 × 20 | 50 | — |
| JH10507-PS(0.5T) | 50 × 35 × 15 | On request | On request | 0.5T |
| JH10507-PS(0.7T) | 50 × 35 × 15 | On request | On request | 0.7T |
| JHDD221 | 50 × 46 × 25 | 348 × 313 × 25 | 30 | — |
| JHXHW0001 | 50 × 47 × 7 | 367 × 310 × 12 | 30 | — |
| JH802270002 | 50 × 50 × 10 | 330 × 277 × 14 | 20 | — |
| JHTREF042 | 51 × 32 × 6 | 225 × 123 × 13 | 10 | — |
| JHSLQC0001 | 51 × 48 × 21 | 380 × 283 × 25 | 30 | — |
| JH10501-PS(0.5T) | 51 × 51 × 11 | On request | On request | 0.5T |
| JH10501-PS(0.7T) | 51 × 51 × 11 | On request | On request | 0.7T |
| JHTREF043 | 52 × 43 × 25 | 460 × 330 × 27 | 42 | — |
| JHTREF044 | 52 × 50 × 15 | 390 × 340 × 20 | 30 | — |
| JHLKXX0001 | 53 × 31 × 10 | 320 × 170 × 10 | 20 | — |
| JH801040004 | 53 × 45 × 14 | 502 × 380 × 20 | 49 | — |
| JH10509-PS | 55 × 24 × 9 | On request | On request | 0.5T |
| JH10510-PS | 55 × 26 × 15 | 360 × 340 × 15 | 50 | 0.5T |
| JH10516-PS(0.5T) | 55 × 45 × 20 | On request | On request | 0.5T |
| JH10516-PS(1T) | 55 × 45 × 20 | On request | On request | 1T |
| JHTREF045 | 55 × 55 × 16 | 565 × 440 × 47 | 20 | — |
| JH800200002 | 56 × 40 × 4.5 | 206 × 179 × 9 | 9 | — |
| JHHHYDZ0001 | 58 × 24 × 4.5 | 345 × 177 × 8.5 | 25 | — |
| JHTREF046 | 58 × 28 × 15 | 360 × 340 × 17 | 50 | — |
| JH500020 | 60 × 30 × 18 | 483 × 442 × 25 | 60 | — |
| JHLFX0001 | 60 × 40 × 9 | 356 × 310 × 14 | 30 | — |
| JHNTFES0002 (black, 0.7T) | 60 × 42 × 16 | 393 × 330 × 16 | 40 | — |
| JHNTFES0002 (black, 1.0T) | 60 × 42 × 16 | 393 × 330 × 16 | 40 | — |
Smaller cavities: ≤45 mm series. Larger cavities: ≤90 mm series.
Representative models and typical components
| Model | Cavity (L × W × D mm) | Outer size (mm) | Cavities | Typical components |
|---|---|---|---|---|
| JHLongYuan0001 (black) | 46 × 19 × 12 | 275 × 143 × 12 | 25 | Long slim connectors, board terminals |
| JHFSKT0001 | 46 × 23 × 17 | 355 × 255 × 17 | 40 | Mid-size SMD connectors |
| JHTREF037 | 46 × 40 × 10 | 265 × 255 × 12 | 20 | QFP ICs, flat modules |
| JHTREF039 | 47 × 15 × 8 | 270 × 205 × 10 | 50 | Low-profile pin headers, FPC connectors |
| JHXAMD0003 | 48 × 25 × 16 | 385 × 285 × 20 | 60 | Multi-pin ICs, automotive sensors |
| JH0210041 (black, 0.8T) | 48 × 48 × 30 | 320 × 320 × 36 | 25 | Square industrial modules, thick connector housings |
ESD sensitivity and tray selection
| Component ESD sensitivity | Recommended tray | Notes |
|---|---|---|
| HBM Class 0 (<250 V) | Antistatic tray required | Highly sensitive; never use clear PET trays; use with ESD workbenches and wrist straps |
| HBM Class 1 (250–2000 V) | Antistatic tray strongly recommended | JEDEC JESD22-A114 classification; most MCU / RF ICs fall in this range |
| HBM Class 2 (2000–4000 V) | Antistatic tray recommended | Typical body static in plants is about 1000–3000 V, so there is still a discharge risk |
| Non-ESD-sensitive parts (passives, structural parts) | Clear tray is fine | Consider clear square trays ≤60 mm, which come in more sizes |
The cavity shapes in this antistatic series correspond to the clear series size ranges, so most applications can switch between the two directly. Always use the antistatic version for ESD-sensitive parts; if one line has both ESD and non-ESD parts, separate them by tray type to avoid static incidents from mixing.
About black models: models marked “(black)” use carbon-black antistatic material with slightly lower resistance (about 10⁶–10⁷ Ω) and stronger static dissipation, for processes with strict ESD control. Models without a color note are usually dark gray or black; please confirm when choosing.
Antistatic series size guide: ≤20 mm, ≤30 mm, ≤45 mm, ≤60 mm, ≤90 mm, ≤200 mm, >200 mm.
Further reading: antistatic trays with no tooling and a 50-piece minimum; shared tray tooling with nearly a hundred molds to lower tooling costs.
How to request a quote: please send (1) the model, or your component dimensions; (2) the quantity.
Request a quote
Send the model or component dimensions, and quantity. Request a quote →