This page continues the brand list from part I, adding selection notes for special machine models: (1) 45° printing squeegees (GTG / G5 series) for heavy solder paste printing; (2) 45° squeegees for DESEN and similar printers, with more consistent hardness than standard blades; (3) squeegees for SEM668, 250–400 mm; (4) stainless steel squeegees + end dams for semi-automatic SMT printers, for manual or semi-automatic machines; (5) stencil-safe squeegees for ESE, Colonwell Win8 and SJ INNO TECH rubber squeegees are also available for small-quantity needs. Sales unit: one piece unless stated.
Choosing a 45° or 60° squeegee: a 45° squeegee applies force more vertically with greater push on the paste, for filling BGA and fine-pitch component pads; a 60° squeegee applies force at a shallower angle with less stencil wear, suited to general through-hole and wide-pitch components. When ordering, confirm the angle setting of your machine’s blade holder; replacement blades must match the existing holder angle and must not be mixed.
| Part type | Machine | Specification |
|---|---|---|
| 45° printing squeegee (with holder) | GTG / G5 | 150–550 mm, 1 pair |
| End dam | GTG / G5 | 1 piece |
| 45° squeegee (with holder) | DESEN and similar | 200–550 mm, 1 set |
| Squeegee blade (blade only) | DESEN and similar | 200–550 mm, 1 piece |
| End dam | DESEN and similar | 1 piece |
| Squeegee (with holder) | SEM668 | 250 / 300 / 350 / 400 mm, 1 set |
| Squeegee blade (blade only) | SEM668 | 250 / 300 / 350 / 400 mm, 1 piece |
| Stainless steel squeegee + end dams | Semi-automatic SMT printers | 150–450 mm, 1 piece |
| Stainless steel squeegee blade | Semi-automatic SMT printers | 150–450 mm, 1 piece |
| Stainless steel rubber squeegee + end dams | Semi-automatic SMT printers | 150–450 mm, 1 piece |
| Stainless steel black rubber end dam | Semi-automatic SMT printers | 1 piece |
| Stencil-safe squeegee | ESE | — |
| Rubber squeegee | SJ INNO TECH | — |
| Solder paste rubber squeegee | Colonwell Win8 | — |
Note: this page shares some machine models with part I; the difference is the added special brands and semi-automatic models.
Trademarks: GKG, GTG, G5, DESEN, SEM668, ESE, SJ INNO TECH, Colonwell and Win8 are trademarks or model names of their owners, used here only to identify compatible machines. JIAHON is not the authorized distributor of these brands in Taiwan.
Request a quote
Send your machine model, holder angle, squeegee length and quantity. Request a quote →