Supply type: for the same part number we may offer new parts (not through the brand’s authorized distributor in Taiwan), compatible parts or used parts removed from machines, depending on stock. Please tell us which you need.
Parts on this page: tape cover, spring and drive arm spares for JUKI ATF, CTF and CTFR series electric feeders: the eccentric nut common to ATF / CTF / FTF, springs of each type (REEL SP / RETURN SP / REWIND SP), CTF 8 mm center shaft parts (retaining rings, washers, screw), tape covers in each size (8–24 mm, NS / FS types), one-way bearing swing arms (8 / 12 / 16 / 24 mm) and the waste tape pressure roller assembly. For reel outer covers, center shafts and ATF gears, see part VI.
Parts cross-reference
| Category | Spec / size | Part number / model | Notes |
|---|---|---|---|
| Feeder eccentric nut | ATF/CTF/FTF | E1111706000 | Common to all three series |
| Push rod spring | CTFR | 40081815 | CTFR push rod spring |
| Spring REEL SP | ATF/CTF/FTF | E1301706C00 | Reel spring |
| Spring RETURN SP | ATF/CTF/FTF | E1300706000 | Return spring |
| Spring REWIND SP | CTFR | 40081810 | Rewind return spring |
| Spring RETURN SPRING | CTFR | 40081809 | Return spring |
| UP CV HOOK SP | CTFR | 40081839 | Upper cover hook spring |
| Center shaft retaining ring | CTF 8 mm | E1307706C00 | Inner cover center shaft |
| Center shaft retaining ring | CTF 8 mm | A3139776000 | Large retaining ring |
| Large washer | CTF 8 mm | E1321706C00 | Center shaft large washer |
| Small washer | CTF 8 mm | E1306706C00 | Center shaft small washer |
| Screw | CTF 8 mm | E1322706C00A | Center shaft screw |
| Tape cover | 8×4(8) | E2203-706-CA0 | CTF/FTF |
| Tape cover | 8×2 0402(5) | E1203-706-CA0 | CTF/FTF |
| Tape cover | 8×2 0201(3) | E1202-706-CA0 | CTF/FTF |
| Tape cover | 12×4/8/12-NS/FS | E3203-706-0AA/AB/AC | CTF/FTF |
| Tape cover | 16×4/8/12-NS | E4203-706-0AA/AB/AC | CTF/FTF |
| Tape cover | 24×8/12/16/24 | E5203-706-00A / 0AB/0AC/0AD | CTF/FTF |
| Tape cover | 24×24 mm | E5203706AAE | ATF |
| Tape cover | 16×12 mm | E4203706AACA | ATF |
| Tape cover | 12×12 mm | E3203706AACA | ATF |
| Tape cover | 8 mm (engraved “8”) | E1202-706-AA0 | ATF |
| Tape cover | 8 mm (center pattern) | E1201-706-AA0 | ATF |
| Tape cover | 8 mm (brass slider) | E1201-706-AA0 | ATF |
| One-way bearing swing arm | 8 mm | E1303-706-0A0 | FTF/CTF |
| One-way bearing swing arm | 12 mm | E3303-706-0A0 | FTF/CTF |
| One-way bearing swing arm | 16/24 mm | E4303-706-0A0 | FTF/CTF |
| Waste tape pressure roller assembly | 8 mm | E1321706AA0 | 8 mm waste tape |
| Swing arm | CTFR 8×2 mm | 40081807 | CTFR |
| Link screw | ATF/CTF/FTF | 40055254 / 40052091 | — |
| Washer | ATF/CTF/CTFR | WS0310002KN | Universal |
| Push rod | 8 mm ATF/CTF | E11067060A0 / E1106-706-0A0 | — |
| Guide roller | ATF/CTF | E1104706C00 | — |
| Front bracket | ATF/CTF/FF | E1214706000A | Front Bracket |
| Link cap plastic sleeve | AFF/CTF/CTFR | E150770600A | — |
| M3 nut | ATF/CTF/FTF | NM6030001SN | Universal |
| Latch screw pin | CTF | E1523706C00 / E1524706C00 / E1502706C00 | Several types |
| UP COVER SHAFT | CTFR | 40081834 | Tape cover pin |
| Gear shim | CTF/ATF | E1108706C00 | — |
Tape cover NS / FS: NS (normal spacing) is the standard pitch and FS (fine spacing) the fine pitch, matching the tape pitch of different components. Besides the tape width (8 / 12 / 16 / 24 mm), confirm the tape pitch (P2 / P4 / P8 etc.) when choosing. If you are unsure, send us the tape pitch and we will help confirm.
Trademarks: JUKI and the model names on this page are trademarks or model names of their owner, used here only to identify the machines and parts. JIAHON is not the authorized distributor of JUKI in Taiwan.
Request a quote
Send the part numbers, feeder series, tape width and pitch, quantities and supply type. Request a quote →