Supply type: for the same part number we may offer new parts (not through the brand’s authorized distributor in Taiwan), compatible parts or used parts removed from machines, depending on stock. Please tell us which you need.
Parts on this page: structural spares for JUKI NF (KE750), RF and EF series tape feeders: center shafts, tape covers (8–56 mm), take-up gears (8 / 12 / 16 / 24 mm), reels and inner covers, tape cover latches and latch pins. For consumable parts that are replaced more often (springs, wire ropes, waste tape clips), see part II.
Parts cross-reference (8–88 mm)
| Category | Spec / size | Part number / model | Notes |
|---|---|---|---|
| Center shaft | 8 mm | JMKI-A028 | — |
| Center shaft | 12 / 16 mm | E6305705000 | — |
| Tape cover spring | Front | KE750 tape cover spring (front) | — |
| Tape cover spring | Rear | KE750 tape cover spring (rear) | — |
| One-way swing arm | 8 mm | JMKI-A05 | — |
| One-way swing arm | 12 / 16 mm | JMKI-A038 | — |
| Reel | 8 mm | E6379-705-0A0 | Metal reel |
| Reel inner cover | 12 / 16 mm | JMKI-A04 | — |
| Tape cover | 8 mm | KE750 NF / 401-69525 | Copper or steel |
| Tape cover | 12 mm | 401-75350 | RF |
| Tape cover | 16 mm | 401-75360 | RF |
| Tape cover | 24 mm | 401-75362 | RF |
| Tape cover | 32 / 44 / 56 mm | 401-91043 / 401-91059 and others | RF |
| Tape cover latch | 8 mm | 401-67223 | RF |
| Tape cover latch | 12 / 16 / 24 mm | 401-72620 | RF |
| Tape cover latch pin | 8 mm | 401-67226 | — |
| Tape cover latch pin | 12 / 16 / 24 mm | 401-72621 | — |
| Take-up gear | 8 mm | 401-67209 | — |
| Take-up gear | 12 mm | 401-72630 | — |
| Take-up gear | 16 mm | 401-72631 | — |
| Take-up gear | 24 mm upper | 401-75373A | — |
| Take-up gear | 24 mm lower | 401-72632 | — |
| Lower take-up reel | 32–88 mm | 401-89127 / 401-891288 | — |
| Tape cover adjusting plate | 12 / 16 / 24 / 32 / 44 mm | 401-72624 to 401-89185 | Varies by size |
| Upper take-up gear | 12 / 16 / 32–88 mm and others | 401-75356A / 401-75368A / 401-74648 and others | Varies by size |
| FF feeder | 12 / 16 / 24 / 32 / 44 / 56 mm | FF series | Includes deep-pocket FFR32 / 44 mm |
Choosing parts: tape covers are split by feeder tape width (8 / 12 / 16 / 24 / 32 / 44 / 56 mm), so confirm the feeder model and tape width before ordering. Take-up gear wear is one of the common causes of uneven feeding, so replacing gears as preventive maintenance is recommended. If you are unsure of the part number, send the machine and feeder models and we will help confirm.
Feeders covered: the parts on this page fit JUKI NF (standard on the KE750), RF and EF series tape feeders. The RF series is the main feeder used with JUKI high-speed placement machines (KE2050 / 2060 / 2070 / 2080).
Trademarks: JUKI and the model names on this page are trademarks or model names of their owner, used here only to identify the machines and parts. JIAHON is not the authorized distributor of JUKI in Taiwan.
Request a quote
Send the part numbers, feeder series, tape width, quantities and supply type. Request a quote →