Supply type: for the same part number we may offer new parts (not through the brand’s authorized distributor in Taiwan), compatible parts or used parts removed from machines, depending on stock. Please tell us which you need.
Parts on this page: consumable spares for JUKI NF (KE750), RF and EF series tape feeders: tape cover spring plates, wire ropes (several sizes), waste tape clips, handle latches and latch pins, feeder springs (several RS / RF types), lever pins, magnetic spacers and guide rod / rubber roller / pin sets. These parts wear quickly, so stock them ahead of time based on how often your lines change over. For structural parts (tape covers, reels, gears), see part I.
Parts cross-reference
| Category | Spec / size | Part number / model | Notes |
|---|---|---|---|
| Waste tape clip | 8 / 12 / 16 / 24 mm | 401-67252 / 401-72657 / 401-72661 and others | Varies by size |
| Handle latch | 8–56 mm | 401-69547 | RF |
| Handle latch pin / screw | 8–56 mm | 401-67237 / 401-71822 | — |
| Tape cover spring plate | 8–24 mm / 12–72 mm | 401-67225 / — | — |
| Feeder spring | Several RS / RF types | 401-67224 / 67262 / 67263 / 67265 / 67267 | Several specs |
| Lever pin | 12 / 16 / 24 mm | RF12/16/24ASJM26 | — |
| Wire rope | 8–24 mm / 8–56 mm | 401-67249 / 401-67250 | — |
| Magnetic spacer | 8 mm | Compatible 0201 / V8 and others | RS / RF |
| Guide rod / rubber roller / pin | 8 / 12 / 16 / 24 mm | 401-69541 to 401-72648 series | One set per size |
Stocking spares: wire ropes and tape cover spring plates are common consumables on RF / EF feeders; for feeder banks with frequent changeovers, keeping preventive stock every quarter is recommended. Waste tape clip part numbers differ by tape width, so check the list of all tape widths in use when stocking, so you are not missing a part during an urgent line stop.
Feeders covered: the parts on this page fit JUKI NF (KE750), RF and EF series tape feeders. There are many feeder spring types, so before ordering, send the feeder model (for example RF8mm or EF12mm) and we will help confirm the correct part number.
Trademarks: JUKI and the model names on this page are trademarks or model names of their owner, used here only to identify the machines and parts. JIAHON is not the authorized distributor of JUKI in Taiwan.
Request a quote
Send the part numbers, feeder series, tape width, quantities and supply type. Request a quote →