Line up with the rack tier and slide the box across: when both the upper and lower tiers of a multi-tier flow rack need restocking, operators often have to bend down or reach up to lift boxes. This cart has a deck of two roller tracks that stops at two standard heights, 850 mm (upper) or 450 mm (lower). Push it up to the rack, line it up with the tier, and boxes roll between the deck and the rack. Height is changed with a foot pedal and handle, assisted by two gas springs, with no power needed.
Specifications
| Item | Specification |
|---|---|
| Overall size | 900 × 650 × 900 mm |
| Load | 20 kg |
| Deck | 625 × 450 mm, two roller tracks, adjustable tilt |
| Docking height | Low 450 mm, high 850 mm |
| Height change | Foot pedal + handle (cable control), assisted by two gas springs |
| Guide | Roller linear slide; spring lock at the end of travel |
| Structure | Aluminium alloy pipe, doubled tubes at key points |
| Casters | PU casters with brakes |
| Power | Not required |
| Weight | 35 kg |
How to use
- Push the cart to the rack, press the foot pedal and pull the handle to set the deck to the tier you need (450 mm or 850 mm).
- Adjust the deck angle to the slope of the rack.
- Slide boxes along the rollers into the rack, or from the rack onto the deck to take away.
Where it is used
- Restocking the upper and lower tiers of line-side flow racks
- Moving material between racks and returning empty boxes
- Areas where running power cables is inconvenient
Used with
- Black ESD turnover boxes (without lids): the 625 × 450 mm deck takes the 610 × 420 series boxes.
- Detachable divider boxes (400 × 600 × 350 mm): for sorting parts.
Common questions
Can the docking heights be changed? The standard heights are 450 mm and 850 mm; for racks with different tier heights, the cart can be made to the rack dimensions.
Does the transfer cart need power? No. Height is changed with a foot pedal and handle, assisted by gas springs.
Request a quote
Send the rack tier heights, box size and quantity. Request a quote →