Repairing raised floors without lifting panels
When the surface of a raised floor in a server room or electrical room wears out, lifting and replacing whole panels takes time and labor, and a scratched, worn surface can break anti-static continuity. This PVC anti-static floor overlay has a self-adhesive backing: peel and stick, no tools needed. Two sizes, 600×600 mm and 590×590 mm, fit common raised-floor panels. Surface resistance is 10⁴–10⁹ Ω, and the 1 mm thickness adds almost no load to the floor.
Specifications
| Item | Specification |
|---|---|
| Material | PVC (polyvinyl chloride) |
| Size | 600×600 mm / 590×590 mm |
| Thickness | Approx. 1 mm |
| Surface resistance | 10⁴–10⁹ Ω |
| Flammability | Does not support combustion |
| Backing | Self-adhesive, peel and stick |
| Models | JH801 / JH802 (10 sheets per pack); black edge strip (10 pcs) |
| Applications | Raised floors in server rooms, electrical rooms, control rooms, laboratories and cleanrooms |
Key features
- Self-adhesive, no tools: peel off the backing and press in place, no glue needed; facility staff can install it themselves.
- Restores anti-static continuity: with 10⁴–10⁹ Ω surface resistance, the repaired area returns to anti-static performance for server room ESD control.
- Two common sizes: 600×600 and 590×590 mm for mainstream raised-floor panels.
- Wear-resistant: the PVC wear layer handles daily foot traffic without bubbling, curling or peeling.
- Easy to clean: the surface resists dirt and wipes clean during maintenance.
- Thin and light: 1 mm thick, so it does not affect the raised floor’s structure.
Applications
- Server room floor repair
- Electrical room / control room floor renovation
- Anti-static floor reinforcement in laboratories
- Local scratch repair in offices
- Maintenance by M&E contractors and property management companies
- Quick refresh by covering an old surface layer
Related: ESD mats · Anti-static anti-fatigue floor mats · Cleanroom wrist straps
Contact us for a quote via our Request a quote page