Parts Compatible with YAMAHA Placement Machines

This category collects spare parts compatible with YAMAHA SMT placement machines, including the YS series (such as YS12, YS20 and YS24), YSM series (such as YSM20 and YSM40), YG series (such as YG200 and YG300) and older YV100 machines. It covers feeders and feeder parts, nozzles, motors, control boards, pneumatic parts and maintenance items, many listed by part number.

What is in this category

  • Feeders: complete CL feeders compatible with YAMAHA in 8 tape widths from 8×2 mm to 72 mm for new lines or batch replacement, plus stick, SS, ZS and CL feeder series.
  • Feeder parts: parts for CL feeders (core mechanisms, one-way bearings, cylinder and air hose systems, reel holders), ZSR/ZSS feeders (latches, springs, handle assemblies, wire ropes), SSY/ZSY feeders (idle gear sets and others) and FV/FT/FS feeders in 8 to 56 mm widths.
  • Feeder cart: feeder carts compatible with YAMAHA in 60 to 96 slot versions.
  • Nozzles: nozzles for YS12, YS24, YSM20, YG200 and YG300 and further nozzle series.
  • Motors and boards: servo motors for the XY axes and head axes, control boards for axis control and sensor signals, head units and Y-axis linear modules.
  • Pneumatics and motion: vacuum and solenoid valves for pick and release, cylinders (barrels, pistons, end caps) and drive belt sets.
  • Sensors and cameras: sensor and camera module spares used when troubleshooting component recognition errors.
  • Maintenance and precision items: lubrication and grease kits for spindles, guides and bearings, feeder calibration bars, PCB support blocks, feeder guides, conveyor edge clamps, stoppers and conveyor wheels.
  • Shared spares: miscellaneous spare parts also used on JUKI machines, listed by part number.

How to choose

  • Start from the part number. YAMAHA parts carry part numbers (for example K-series numbers) in the parts manual and on the part; match by part number where possible.
  • Confirm the machine model. Motors, boards and head units differ between YS, YSM and YG models; nozzles must suit the head and component size.
  • Match the feeder family and width. CL, ZS/ZSR/ZSS, SS/SSY/ZSY and FV/FT/FS feeder parts are not interchangeable.
  • Keep maintenance items scheduled. Lubrication, calibration and nozzle replacement on a schedule help hold placement accuracy.

What to send us

To quote or source a part, send: the machine model (for example YSM20 or YS24), the head, feeder or axis concerned, the part number, a photo of the part and its label, the quantity, and the problem you are seeing. Contact Jiahon.

Parts in this category are compatible (non-original) parts unless the product page says otherwise; YAMAHA is a trademark of its owner and is used only to identify machine compatibility.

Email us for a quote: [email protected]

Back to top