Two stencils, two separate chambers — no cross-contamination of wash and rinse.
Why two chambers
When two stencils share one wash tank, the rinse water gets dirty quickly, and the next stencil has to wait for the first. JHPBT-1000XSD builds wash, rinse and dry as two fully independent chambers, each with its own filtration, electric pump, spray arms and nozzles. Two stencils are controlled independently, wash and rinse fluids never mix, rinse water lasts longer and less solvent is used.
During cleaning the stencil moves up and down while 16 spray arms jet heated cleaning fluid at high pressure. Wash and rinse can run open- or closed-loop; rinse quality is monitored by a resistivity meter, and a barcode scanner and industrial PC make MES connection easy.
Process flow: load stencil by hand → stencil oscillates → pressurized spray wash with inline central filtration → wash fluid recovery → pressurized spray rinse with filtration → air-knife drying → unload by hand.
Applications
- SMT stencils, copper mesh and glue screens: solder paste and red glue on surfaces and aperture walls
- Glue printing fixtures and misprinted PCBs
- Lines with many stencils, needing two at once, or barcode records and MES
Specifications
| Item | Value |
|---|---|
| Model | JHPBT-1000XSD |
| Cleaning area | 750 (L) × 750 (W) × 40 (H) mm, 2 stencils independently |
| Machine size | 1580 (L) × 1700 (W) × 2050 (H) mm |
| Wash nozzles | 80, 304 stainless, 65° fan (2 independent wash chambers) |
| Rinse nozzles | 80, 304 stainless, 65° fan (2 independent rinse chambers) |
| Drying | 8 air knives, 304 stainless (2 independent dry chambers) |
| Size setting range | 50–750 mm |
| Rinse resistivity monitoring | 0–18 MΩ |
| Wash / rinse / dry time | 0–100 min each (rinse count selectable) |
| Exhaust | Φ123 × 30 mm (H); no extra exhaust boost needed |
| Power / air | 3-phase 5-wire 380 V; rated 21 kW; 0.45–0.7 MPa |
| Net weight | approx. 950 kg |
Power frequency follows the unit’s nameplate; please confirm the configuration when ordering.
Features
- Fully independent chambers: separate filtration, pumps, spray arms and nozzles; no fluid crossover.
- 16 spray arms, no blind spots; arms and nozzles removable.
- Software pressure control: spray pressure by inverter, electronic gauge adjustable in software; automatic fill and drain.
- MES-ready: barcode scanner and industrial PC; resistivity-monitored rinse.
- Protection: emergency stop, leakage protection, photoelectric sensors at window and entry against splashing.
Which one to choose
- Two stencils washed and rinsed independently: JHPBT-1000XSD.
- Automatic door: JHPBT-1000ZS.
- Single stencil, manual loading: JHPBT-1000X.
- Screens with printing ink or glue: pneumatic screen cleaner JHPBT-1200.
Request a quote
Tell us stencil size, daily quantity, paste or glue type, and whether you need MES. Request a quote →