中文English

How to choose an SMT nozzle? Maker brand vs fit-type vs custom — explained in one article

The nozzle is a consumable on an SMT mounter that is changed very often, and also a part of line costs that is easy to overlook. Choose the right sourcing route and the amount saved over a year is often beyond expectation. Taking the four major brands Panasonic, FUJI, JUKI and YAMAHA as examples, this article explains everything from engineering selection to purchasing strategy.

First understand your machine: machine generations of the four major brands

Before choosing a nozzle, confirm which generation your machine belongs to. Different generations differ in nozzle specification, mounting method, and even the interface of the nozzle head. The table below collects the main models still running on the market for the four major brands.

Panasonic

GenerationRepresentative modelsMarket statusNozzle features
Previous-generation CM seriesCM402, CM602, CM202, DT401No longer current models (per the manufacturer’s announcements), but a large number are in serviceKXFX-series part numbers, models such as 110/115/120/130/140
Current mainstay NPM seriesNPM-D3/D3A, NPM-W2, NPM-WXOn saleN610-series part numbers, 110S/115AS/120S/225CS/240CS and others, supports 2D recognition codes
New flagship G seriesNPM-GH, NPM-GWOn sale (since 2022)Supports ±10 μm ultra-high precision, with Auto Setting Feeder

Purchasing point: although the CM series are no longer current models (per the manufacturer’s announcements), a large number of machines are still running worldwide. Nozzles are high-frequency consumables, and the purchasing need for the CM series will not disappear in the short term. In addition, some NPM-series nozzles can be used downward with CM models (for example, NPM-D3A nozzles can be used with the CM301/CM202); when buying across generations, always confirm whether they can be used together.

FUJI

GenerationRepresentative modelsMarket statusNozzle features
Previous-generation NXT seriesNXT I, NXT II, NXT IIINXT III still on sale; I/II widely in serviceH01/H02/H04/H08/H12/H24 head types, R36-series part numbers
Current mainstay AIMEX seriesAIMEX IIIOn saleSome nozzles shared with the NXT series
Current mainstay Smart FactoryNXTR AOn saleAutomatic changeover design, nozzles change automatically

JUKI

GenerationRepresentative modelsMarket statusNozzle features
Previous generationKE-2050/2060/2070/2080No longer current models (per the manufacturer’s announcements), still in service500–509 series nozzles
Current mainstayRS-1, RX seriesOn saleJUKI’s own specification, some usable with older machines

YAMAHA

GenerationRepresentative modelsMarket statusNozzle features
Previous generationYV series (YV100X, YV88X)No longer current models (per the manufacturer’s announcements), still in service31x–71x series nozzles
Current mainstayYSM series (YSM10, YSM20, YSM40R)On saleNozzles for the HSD high-speed head

› Related products: Yamaha-fit nozzles (YS12 / YS24 / YSM20 / YG200 / YG300), Yamaha-fit nozzles II

› Further reading: How component data and nozzles are set up in the Yamaha YSM20R program

Three sourcing routes: how to choose?

For the same nozzle part number, the market may offer three ways of getting it, with very different prices and lead times. They are explained one by one below.

ItemMaker brand (imported)Fit-type standard itemCustom odd-shaped nozzle
Source of qualityMade by the manufacturer, same supply as the agentPrecision-machined to the manufacturer’s specification, passes machine recognitionMade to the customer’s drawing or sample, with tooling
Price (vs the agent’s quote)Generally 10–20% cheaper*Generally 30–60% cheaper*Quoted case by case from the specification
Machine matchingPer the machine’s design specificationVerified by machine recognitionNeeds testing and confirmation at the customer’s end
Lead timeReady to ship: 3–5 days; not ready: 2–4 weeks*Regular items ready to ship: immediately; special part numbers: 1–2 weeks*About 1 month (including sampling and testing)*
Where it is usedCustomer specifies the maker brand, high-precision stations, lines in the validation periodCost-down on mass-production lines, high-consumption stations, standard componentsOdd-shaped parts, special packages, part numbers the manufacturer no longer supplies
Minimum orderUsually from 1 pieceUsually from 1 piece1 piece for sampling; volume depends on specification

* The prices and lead times above are the general case, and individual cases still vary.

Route 1: maker-brand import — the same quality, a better price

Import means obtaining the goods from the manufacturer or its overseas channel, bypassing the markup of the agent in the Taiwan region. The product itself is exactly the same as what the agent sells, just the purchasing channel differs, so the price is usually 10–20% lower (this is the general case, and individual cases still vary).

When should you choose the maker brand? When your customer explicitly requires “maker-brand” nozzles, when the line is in the validation stage for a new product and variables need to be removed, or when a high-precision station (for example ±25 μm or tighter) is extremely sensitive to nozzle tolerance, the maker brand is a steady choice. Obtaining it through import lowers purchasing cost without giving up quality.

Route 2: fit-type standard items — the main route for cost-down

A fit-type nozzle is a substitute precision-machined to the manufacturer’s specification. A good fit-type nozzle matches the maker brand in outer dimensions, vacuum holding force and material hardness; the key is that it must pass the mounter’s automatic recognition system — this is the hard measure of fit-type quality.

The cost advantage of fit-type nozzles is clear: compared with the agent’s quote, you can generally save 30–60% (this is the general case, and individual cases still vary). For standard stations that consume a lot on a mass-production line (for example nozzles for 0402/0603 chips), the saving accumulated over a year is considerable.

Track record for reference: Jiahon’s fit-type nozzle products already have a large record of sales, and are verified by machine recognition before shipping; the actual result depends on a trial on your own machine.

Route 3: custom odd-shaped nozzles — solving the “cannot find it” problem

Some components have special packages that the manufacturer’s standard nozzles cannot pick or place correctly. Then a custom odd-shaped nozzle is needed: following the part’s outline, weight and material, the nozzle’s suction port shape, suction distribution and contact surface are redesigned.

The standard flow for a custom nozzle: the customer provides a sample and drawing → Jiahon plans the design → quotation confirmed → 1 sample piece supplied for testing → volume production after the test passes. The whole schedule is about one month (this is the general flow, and individual cases still vary).

Another common situation is an old nozzle part number the manufacturer no longer supplies. For example, some special CM-series part numbers may no longer be supplied by the manufacturer (per the manufacturer’s announcements), yet the factory’s machines are still running. Remaking to the source specification through the custom route solves the broken supply.

› Related products: Nozzle customization (odd-shaped nozzles)

Quick reference of common nozzle part numbers for the four brands

The nozzle part numbers most often asked about for each brand are listed below, so engineers and buyers can compare quickly. For these part numbers Jiahon can offer either maker-brand import or a fit-type solution.

Panasonic — common nozzles for CM / NPM series

Usable machinesModelPart number examplesComponent range
CM402/CM602110KXFX0383A00Tiny parts such as 0402 chips
CM402/CM602115 / 115AKXFX04MTA00 / KXFX037NA000603 chip
CM402/CM602120 / 130 / 140KXFX0384A00 – KXFX0386A000805 – 1206 chips
CM402/CM6021001 – 1005KXFX037SA00 – KXFX037WA00IC packages such as SOP/QFP
NPM/CM602110S / 115AS / 120S / 130SN610017371AC – N610017375AC0402 – 1206 chips (S series)
NPM/CM602225CS / 230CS / 240CSN610040786AA – N610040853AAMedium and large ICs / connectors

For the complete list of Panasonic nozzle part numbers and current availability, see Jiahon’s Panasonic nozzle product page.

FUJI — common nozzles for the NXT series

FUJI NXT nozzles must be chosen to match the machine’s working head, and each head type picks a different range of parts (per the head specifications published on FUJI’s website; size codes as marked by the manufacturer):

Head typeComponent range
H240201 – 5×5 mm
H120402 – 7.5×7.5 mm
H041608 – 38×38 mm
H01 (single-nozzle head)From 1608

For the correspondence between nozzle part number and head type, follow FUJI’s cross-reference table; when asking for a quote, please give the machine head type and nozzle part number together.

For detailed specifications and selection notes on FUJI NXT nozzles, see Jiahon’s FUJI nozzle product page.

JUKI / YAMAHA

For JUKI and YAMAHA, nozzles are likewise offered as maker-brand imports and fit-type solutions; there are many part numbers and they are not listed one by one here. For a quote and lead time on a specific part number, please enquire directly.

Nozzle life and daily maintenance

Whichever route you choose, nozzle life depends on daily maintenance. The points below directly affect how often nozzles are replaced and the pick-failure rate:

Maintenance itemSuggested frequencyConsequence of skipping
Visual check of the nozzle (wear, deformation, nicks)Every shiftPoor pick → higher thrown-part rate
Nozzle cleaning (ultrasonic cleaning or a special cleaning machine)Weekly, or by outputResidue / paste build-up → vacuum holding force drops
Nozzle height calibrationMonthly, or after a changeoverPlacement height drifts → open joints / shift
Nozzle inventory count (safety stock management)MonthlySudden shortage → line stops waiting for parts

Purchasing reminder: for high-consumption stations, we suggest keeping at least 2 weeks of safety stock of nozzles. Jiahon keeps regular fit-type standard part numbers ready to ship for quick delivery; popular maker-brand imported part numbers are also kept as regular stock. Plan purchasing ahead to avoid a sudden stop waiting for parts.

› Related products: Fully automatic nozzle cleaning machine JHPBT-40 / 60S / 80

Further reading

For selection, acceptance and line cases, these articles say it more clearly than a specification table.

Also see | nozzle selection by brand

Need a quote or a specification check? Enquire now

Back to top