Enter your part’s length × width × height (or diameter), and we’ll list the models it fits from all JIAHON trays (anti-static and clear, square and round), with pocket and outer dimensions and pockets per tray. You can also search by model number directly.
Enter part dimensions (mm) to list the tray models that fit, comparing anti-static and clear together. By default, the pocket is 0.3–2.0 mm larger than the part, and swapping length and width also counts.
Finder form (interface labels)
| Tab | Fields |
|---|---|
| Square parts | Length mm · Width mm · Height mm (optional) |
| Round parts | Diameter mm · Height mm (optional) |
| Cylindrical parts | Diameter mm · Length mm |
| Model search | Model number or part of it |
- Material: All / Anti-static / Clear
- Pocket larger than part by (min.) · Pocket larger than part by (max.)
- Button: Find models
Don’t want to enter dimensions? Choose by material and pocket long side
Click a cell to see all models in that range.
| Material \ pocket long side | ≤20 mm | ≤30 mm | ≤45 mm | ≤60 mm | ≤75 mm | ≤90 mm | ≤120 mm | ≤200 mm | >200 mm |
|---|---|---|---|---|---|---|---|---|---|
| Anti-static square | 40 models | 47 models | 48 models | 41 models | — | 47 models | — | 52 models | 14 models |
| Clear square | 38 models | 68 models | 112 models | 80 models | 59 models | 38 models | 58 models | 48 models | 28 models |
- Anti-static round vacuum-formed trays: all sizes (12 models)
- Clear round: diameter ≤30 mm (58 models) · diameter ≤60 mm (67 models) · diameter ≤120 mm (37 models)
- Clear cylindrical vacuum-formed trays: all sizes (50 models)
How to measure and read the results
- Measure the part’s outer dimensions (length, width, height, in mm); height can be left blank.
- By default, models with “pockets 0.3–2.0 mm larger than the part” are listed, and swapping length and width also counts. If there are none, the range automatically widens to 0–3 mm; if there are still none, the closest larger models are listed.
- When height is entered, a model is listed only if its pocket depth is at least 0.2 mm greater than the part height.
- For IC, SMD and other static-sensitive components, choose anti-static (black) trays; clear trays are made of ordinary insulating material.
- Dimensions are nominal values; measurements may differ due to tolerances, tools or technique. To confirm a fit, we recommend requesting a sample first.
Can’t find a size that fits? Contact JIAHON about customization.
To see all tray products and categories at once, see the anti-static tray category page.
Before concluding no size fits, read the shared mold explanation to check whether an existing mold can be used.